2004 VW Jetta Window roll up module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71475
Printed Date: May 08, 2024 at 11:45 PM
Topic: 2004 VW Jetta Window roll up module
Posted By: kevin1488
Subject: 2004 VW Jetta Window roll up module
Date Posted: January 25, 2006 at 11:58 AM
Ok so here is the deal i am about to install a 791 into a 04 Jetta and i know there is a way you can use one of the outputs to roll up the windows and down the windows with out using a DEI 530t i have heard of being done before and was wondering if anyone has done it and if so how. i know in this jetta i am about to do you can stick the key in the door and turn it and the windows go up or down... please help anyone
Replies:
Posted By: gus1
Date Posted: January 25, 2006 at 1:32 PM
Use Aux. 4 and Aux. 5, attatch them to the doorlock wires.... set them for validity. Done.
Gus
-------------
Wherever I go, that is where I end up......
Posted By: kevin1488
Date Posted: January 25, 2006 at 6:40 PM
Anyone else done this...
Posted By: kevin1488
Date Posted: January 25, 2006 at 6:45 PM
So Aux 4 to lock and Aux 5 to unlock then when the windows down if i push lock and hold it will roll them up correct.. and vice versus..
Posted By: gus1
Date Posted: January 26, 2006 at 10:51 AM
Actually, it would be lock+aux for ch.4, unlock+aux for ch.5.
If you are looking to do comfort closure (IE: windows rollup when locked), You could use a 611T pulse timer triggerd off of the ground when armed to provide a long pulse to the door lock wire.
I have done this on a number of VW's, including my own. Works wonderfully.
Gus
-------------
Wherever I go, that is where I end up......
|