2000 Audi A6 remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71503
Printed Date: May 28, 2024 at 10:30 PM

Topic: 2000 Audi A6 remote start

Posted By: mmyet
Subject: 2000 Audi A6 remote start
Date Posted: January 25, 2006 at 7:21 PM

I'm install Starter for AUDI A6 2000. i got the note below from the wiring Diagram. but I don't get the mean of it. Can someone please help me with it ? Thank you

NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold.

Replies:

Posted By: infinkc
Date Posted: January 25, 2006 at 7:29 PM

means that there are 2 starter wires and both must receive the same signal from the remote start unit inorder to start the car. you can isolate them with a relay, wire coming from remote start(starter wire) 85, ground 86, +12v 30, and output to second starter 87, the first starter wire you can directly use the wire coming from the remote start

-------------
There are 10 types of people in the world, ones that understand binary and ones that dont.

Posted By: mmyet
Date Posted: January 25, 2006 at 8:20 PM

posted_image

If the Menu book show like that how can i wire the 2nd starter wire

Posted By: jacqueslacombe
Date Posted: January 26, 2006 at 2:14 AM

Well according to the astrochart from canada you don't need 2 starter wire The BAT = RED IGN = BLACK STARTER = RED / BLACK ACC = BLACK / YELLOW Those the same color for a Volkswagon

Print Page | Close Window