Print Page | Close Window

05 mazda 3, 771xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72335
Printed Date: June 02, 2024 at 4:11 PM


Topic: 05 mazda 3, 771xv

Posted By: redpeppers
Subject: 05 mazda 3, 771xv
Date Posted: February 07, 2006 at 12:52 AM

I recently installed a 771xv into a Mazda 3……everything went flawlessly except when I got the door trigger and truck trigger……the wires in the car for the door trigger rest at ground and then go to an open circuit.  I was able to find all of the triggers in the pass. kick panel.  I wired up a relay ……..86 – 12volt constant, 85 – from door triggers (diode isolated), 87 – empty, 87a – ground, 30 to green wire of brain.  I ran out of time and the customer is coming back on Tuesday, the relay I wired up was not triggering the alarm, does this sound like I wired it right or is there something I missed?  Also I could not find the trunk trigger in the pass. kick.  Do you know off the top of your head where exactly I should be looking to find it, it would sure beat running wire to the trunk.



-------------
Where theres is a wire there's a way.



Replies:

Posted By: genehewett
Date Posted: February 07, 2006 at 4:37 AM
  click here.



Posted By: JWorm
Date Posted: February 07, 2006 at 9:51 AM
https://www.the12volt.com/installbay/forum_posts.asp?tid=71829&KW=Mazda+

I did one recently. You'll need (4) 10k ohm resistors and 4 diodes. I can email you a document. Send me a PM with an email address.



Posted By: KarTuneMan
Date Posted: February 07, 2006 at 10:02 AM

genehewett wrote:
  click here.

Your link leads to the log in page for DEI.....gotta password to go with it?posted_image



-------------


Print Page | Close Window