2002 mitsubishi eclipse dome lamp
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73287
Printed Date: May 19, 2024 at 5:05 AM
Topic: 2002 mitsubishi eclipse dome lamp
Posted By: b_faulk75
Subject: 2002 mitsubishi eclipse dome lamp
Date Posted: February 21, 2006 at 10:32 PM
Hey, very cool and informative website, i am hoping someone can help me out, i recently installed a crimestopper alarm on a 2002 mitsibishi eclipse, i am kinda new to alarm systems and i think i may have fried something, i think i hooked up the dome circuit wrong, i was trying to hook up illuminated entry and i did not use a relay, anyhow when i got done with the install i noticed that the illuminated entry feature was not working and that the dome lamps no longer worked unless you turn the switch to on instead of the door position. so i disconnected the wire for the dome feature on the alarm and still no dome, i checked every fuse in both fuse boxes and all test and look ok. i can't seem to find a dome schematic on the net anywhere, i bought a haynes manual and it doesn't tell me anything really, i guess my question would be what could i have fried? BCM? Chime Accessory Module? I really don't know how the system works so i can' t fix it. Any info or even a place to get a schematic would be appreciated. Thank You
Replies:
Posted By: b_faulk75
Date Posted: February 23, 2006 at 7:07 PM
Noone can even tell me where to get a schematic or diagnosis info? Please help if possible
Posted By: cntrylvr79
Date Posted: February 23, 2006 at 7:35 PM
What wire did you hook up to in the vehicle? Did you send +12v or ground to that wire?
-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer
|