Concept 300 PIN Code?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74461
Printed Date: June 12, 2024 at 4:02 PM

Topic: Concept 300 PIN Code?

Posted By: graemesimpson
Subject: Concept 300 PIN Code?
Date Posted: March 14, 2006 at 10:26 AM

Hi People,

I am just about to pickup my new motor which is fitted with the Clifford Concept 300 (UK), nothing wrong with it and it works fine, although the guy does not have the PIN code to use the bypass button.

Now I have the Clifford kit to connect to a laptop and the Pro software but I believe it requires this code before it will work.

Anyone any idea how to do a reset or obtain the code.

Any advice would be appreicated.

Thanks

Graeme

P.S Is "Steve" from Scotland, worked for GAP Security, still around????

Replies:

Posted By: Twelvoltz
Date Posted: March 14, 2006 at 10:40 AM

Tried to get the install manual for it, but it is only offered in Dutch. The user's manual is in English. I hope this helps.

Posted By: joe_1
Date Posted: March 14, 2006 at 3:25 PM

you are exactly right i have the same unit in my car it asks for pin when the cliffnet wizard is pluged into it, i have asked on here before how to get around it on other models but never get a reply, i know an installer over here in the uk that knows how to do it, i will try find out and pm you, if you find out before me please let me know thanks. joe

-------------
i am also a technician so if you have any engine trouble let me know, and i will do my best to help.