matrix rsx 3.5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74663
Printed Date: May 26, 2024 at 1:06 AM

Topic: matrix rsx 3.5

Posted By: screamdj
Subject: matrix rsx 3.5
Date Posted: March 17, 2006 at 8:53 PM

can anyone help? i am having a problem with install? while i was installing the alarm the remote was working fine, but now it does not seem to respond? it works fine but shows up as if it is not within range?

what can i do?

-------------
Great minds think alike

Replies:

Posted By: Powermyster
Date Posted: March 18, 2006 at 8:23 PM

is the alarm function working ok or does that appear to be out of range also

-------------
Why oh Why didn't i take the blue pill
Darren Power

Posted By: screamdj
Date Posted: March 19, 2006 at 7:20 PM

no the remote is not responding at all? i have tryied to rest it but still not luck? it was all working fine while the install was taking place? it only after i had complete the auto start that it stoped working?

-------------
Great minds think alike

Posted By: rsudbay
Date Posted: March 19, 2006 at 10:26 PM

try re-programing the remote to the alarm. that or you have damaged the remote. i got mine wet and it did the same thing

-------------
hey, everyone has got to start somewhere. but ill learn

Posted By: kgerry
Date Posted: March 20, 2006 at 9:24 AM

why were you testing it DURING the install? i always do the complete install and then walk over and pick up the remote....

you may have inadvertantly gone into programming mode by using it without the appropriate circuits powered... as mentioned try to re-learn the remote again on auto-learn.... and in the future dont fiddle with it during the install but complete the install first and then test your functions.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: 32v2004mach1
Date Posted: March 21, 2006 at 10:12 PM

Does any one have a installation manual for the Clifford Matrix 3.5???? I need one and I seem to have hit a wall in finding one on the net. I'm doing an install on a 2004 Mustang Mach 1.

Any help would be great.

-------------
IF it's not a Mach 1.....It's not Muscle!!!

Posted By: screamdj
Date Posted: March 22, 2006 at 5:32 PM

I have a manual, what i can try and do is make a photo copy of the quick guide and email it to you?

-------------
Great minds think alike