Power mirrors downturn on reverse?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76059
Printed Date: October 31, 2024 at 7:05 PM

Topic: Power mirrors downturn on reverse?

Posted By: dan.murray
Subject: Power mirrors downturn on reverse?
Date Posted: April 11, 2006 at 7:57 AM

Hi all, I have a 1993 Audi 80 and i am constantly having to turn my LEFT side power mirror down so i can see the curb. i was wondering if anyone knows how i can make the mirror do this automatically when i put the car into reverse? the car has automatic transmission. Any help will be greatly appreciated.

Oh, and also go back to original position when car is put into drive.

-------------
It's all about bass

Replies:

Posted By: joe_1
Date Posted: April 11, 2006 at 5:50 PM

you could make it go down, but making it return i dont think will be possible, it would rquire programed moduel,

or you could buy a bmw they have that feature on some of their models. lol

-------------
i am also a technician so if you have any engine trouble let me know, and i will do my best to help.

Posted By: KPierson
Date Posted: April 11, 2006 at 10:02 PM

https://kptechnologies.com/forums/viewtopic.php?t=122

That details a module in development to do what you are talking about.

-------------
Kevin Pierson

Posted By: bmwpwner
Date Posted: April 16, 2006 at 12:32 AM

yea this is a bmw feature they have been doing this for years. in theory you could do this action with a timed relay i would think. you would need to tap into the reverse circuit and have this trigger the relay setup to adjust the mirror down for a pre-calculated amount of time and then disable that relay. then as the vehicle is put back into the drive position it would take another timed relay to adjust it back up to the original position. the only problem i can think of is if you went straight into drive it would adjust the mirror up to far. the other option would be if you could get an aftermarket seat memory kit and wire and calibrate that into doing the mirrors rather than the seats. again it is all in theory and that link above could be promising. posted_image

good luck!

-------------
"I cannot teach anybody anything, I can only make them think."
-Socrates-