02 nissan x-terra does not rs when cold

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77482
Printed Date: June 15, 2024 at 10:16 AM

Topic: 02 nissan x-terra does not rs when cold

Posted By: alariskirein
Subject: 02 nissan x-terra does not rs when cold
Date Posted: May 09, 2006 at 1:41 AM

i have a problem ,hope somebody can help. i install an prestige aps 996a rs on a 02 nissan x-terra and everything works but the remote start, when i tryed to rs the starter just keeps cranking but do not engage. i have this problem before with an 95 nissan sentra ,when the car get hot the rs works.by the way the 02 x-terra doesn't seem to have a transponder on the key.does anyone have the window roll up-down wire info i have the omega info disc but doesn't show that info. any help will be apreciated.i saw that there's a cold start wire but don't say what polarity has.

Replies:

Posted By: rallysport
Date Posted: May 09, 2006 at 1:53 AM

cold start is GREEN/ YELLOW with + polarity

windows

LF blue - blu/blk blue

RF blu/yel - blu/wht

LR grn/red - grn/yel

RR grn/wht - grn/blk

all at drivers door switch

-------------

Posted By: alariskirein
Date Posted: May 11, 2006 at 11:31 PM

thanx a lot .i hope it works. so how do i have to connect this wire , can i connect it with the second ignition from the alarm ?also my program shows a BLACK/ pink wire for the cold start ,and the location is on the ignition sw.is this the same wire ? what kind of connection goes for the windows, reversal rest at ground, positive or nothing?thank you, have a good day.

92 honda accord coupe

focal polyglass components 6.5"

mb quart premium components 6.5"

mb quart discuss components 4"

alpine cda-9855 headunit w/ 6 disc mp3 cd changer

focal polyglass sub 40v2 16"

Posted By: dxdenis02
Date Posted: May 12, 2006 at 10:21 AM

cold start wire is just that a starter wire i usually wrapped them together

use a meter to verify the correct wire

use a meter to test the windows system

if you dont have or dont know how to use a meter please dont install