Print Page | Close Window

Viper 690XV, Remote transmitter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79913
Printed Date: May 11, 2024 at 2:10 AM


Topic: Viper 690XV, Remote transmitter

Posted By: deb10042
Subject: Viper 690XV, Remote transmitter
Date Posted: July 04, 2006 at 5:51 AM

Can anybody tell me how it works?:

- in the installation manual it says, that the remote transmitter can either be programmed to standard configuration (ar and disarm with two separate keys) or to single button configuration (arm and disarm with only one key); but it's not described, how I can switch between these configurations

- in the insatllation manual it also says, that a lot of individual key combinations for different functions can be assigned to the butoons of the remote transmitter; how can I do this?

Thanks for your help




Replies:

Posted By: captainzab
Date Posted: July 04, 2006 at 11:21 AM
First, You have to delete all transmitter if you want to reprogram your remote.
Do exactly as the manual says, turn ignition on, press program button how many times you want for that function, press one more and HOLD. Then press any button on the remote you want to assign the function to


Print Page | Close Window