bypass module, 99 chrysler lhs
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80617
Printed Date: May 23, 2024 at 6:45 PM
Topic: bypass module, 99 chrysler lhs
Posted By: playboy00786
Subject: bypass module, 99 chrysler lhs
Date Posted: July 22, 2006 at 6:09 PM
i have a 99 chrysler lhs and im going to put a scytek galaxy 5100rs in do i need any sort of bypass module or if u can tell me everything i need to make this a clean install. Thanks
Replies:
Posted By: JWorm
Date Posted: July 22, 2006 at 7:34 PM
Only vehicles with gray keys have the immobilizer. If you have a grey key, a DEI 555c will work for a bypass.
You will need a couple relays for the doorlocks, as well as one for the trunk release. You will also need a couple resistors for the locks. The value of the resistance varies depending on if the car has a factory alarm or not.
Posted By: playboy00786
Date Posted: July 22, 2006 at 8:26 PM
Now i have another question | does anybody know what type of door lock system a 99 chrysler lhs has if not how would i find out. And do i need any type of resistors for my factory alarm |
Posted By: JWorm
Date Posted: July 23, 2006 at 12:17 AM
The wire you need to use is lt. GREEN/ orange located in the drivers kick panel, or in the harness coming in from the drivers door. You will need to turn the key in the lock cylinder when metering it. It will not meter from the switch on the door.
Arm/lock is (+) thru a 1870 ohm resistor
Disarm/unlock is (+) thru a 680 ohm resistor
A single 680 ohm pulse will disarm the factory alarm. A second pulse will unlock the doors. Have both the unlock output and the disarm output of the remote start trigger the relay for disarm/unlock. Program the remote start to double pulse unlock.
Posted By: john ogrady
Date Posted: July 24, 2006 at 9:08 PM
I would use a CHDL2-PK by-pass module.This takes care of everything locks,transponder by-pass,trunk and OEM alarm all in one unit from Omega.
|