airbag, abs and parking break lights on
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80860
Printed Date: June 08, 2024 at 3:59 AM
Topic: airbag, abs and parking break lights on
Posted By: playboy00786
Subject: airbag, abs and parking break lights on
Date Posted: July 27, 2006 at 7:40 PM
Along with having my power windows not being able to roll up i noticed that the parking break, airbag and abs lights are on even when i start my car. what could possible be wrong?
Replies:
Posted By: josh1979
Date Posted: July 27, 2006 at 7:51 PM
what kind of car and what was the last two thing you did to it ?
-------------
bring back the rotary phone so i dont have to press 1 to proceed in english
Posted By: playboy00786
Date Posted: July 27, 2006 at 8:05 PM
its a 99 chrysler lhs the last thing i did was disconnect all the wiring harnesses from the fuse block so that i could see the wires in the back because i could not see them while it was all plugged up. plugged it all back together and poof this is what happened. i know i didnt plug something back in wrong because the harnesses only fit into one slot. do i have to maybe reset something but that doesnt explain why the windows dont work.
Posted By: swamprat323
Date Posted: July 27, 2006 at 11:22 PM
well try to un hook the battery for abotu 15 min. other than that i dotn know.
Posted By: glantern83
Date Posted: July 30, 2006 at 8:56 PM
unhocking the battery only works for vehcles upto 1995 that obdI for 1996 and newer obdII you need to ue a scan tool to reset/clear the DTCs in the computer....
take the car to a dealer or invest in a very good scantool that can clear abs.srs.dtc.and check engine codes...
-KITT
Posted By: glantern83
Date Posted: July 30, 2006 at 8:58 PM
unhoocking the battery only works for vehcles upto 1995 that obdI for 1996 and newer obdII you need to ue a scan tool to reset/clear the DTCs in the computer....
take the car to a dealer or invest in a very good scantool that can clear abs.srs.dtc.and check engine codes...
-KITT
Posted By: JWorm
Date Posted: July 30, 2006 at 11:49 PM
You may have blown a major fuse. Check all the fuses in the car....especially the bigger ones under the hood. Sounds like the second ignition fuse, or maybe one of the constant power feeds in the ignition harness.
Posted By: extreme1
Date Posted: July 31, 2006 at 1:56 PM
there are 3 fuses that supply power to the ignition switch on that car, they are under the hood.
main ign and starter are on one and the Acc wires are on another while 2ng ign is on the third one.
Check for a 30 or 40 amp fuse under the hood labelled IGN/ACC or IGN Start
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
|