Increase crank time aon a R1100 starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8328
Printed Date: May 20, 2024 at 11:36 AM

Topic: Increase crank time aon a R1100 starter

Posted By: toyvet1
Subject: Increase crank time aon a R1100 starter
Date Posted: January 19, 2003 at 11:33 AM

How do I increase the cranking time on a Bulldog R1100 remote starter, when I need to start the car in the cold. I can't get the car to learn the tach signal. Any idea's.

Replies:

Posted By: 10nesne1
Date Posted: January 19, 2003 at 11:04 PM

https://www.bulldogsecurity.com/pdf/ModelsRS1100_1100E_114.pdf

The programming for learn tech is on page 10 and on the bottom of the page.

Posted By: toyvet1
Date Posted: January 20, 2003 at 4:44 AM

I've tried to get the car to learn the tach signal but when you program it the car does not start during the prodceure just keeps cranking, but the car will start fine when it's warm or you use the key.

Posted By: 10nesne1
Date Posted: January 20, 2003 at 8:55 AM

It sounds like you have hookup a wrong tech wire. You will have to find a right wire. What kind of vehicle do you have?

Posted By: toyvet1
Date Posted: January 22, 2003 at 7:26 PM

1998 chevy caveliar, I am hooking the tach up to a white wire off the coil pack, it reads 6v at ilde and increses to about 9v aengine speed increases.

Print Page | Close Window