05 maxima remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84096
Printed Date: May 15, 2024 at 1:04 AM
Topic: 05 maxima remote start
Posted By: mxxmikexx
Subject: 05 maxima remote start
Date Posted: October 13, 2006 at 4:34 PM
will the factory security trip if you dont disarm while r/s? or will it shut down once ignition turns on? I have a guy who just wants remote start added, no keyless, so obviously i dont want to run a wire into the door if i dont have to.
Replies:
Posted By: shaggy12volt
Date Posted: October 13, 2006 at 5:13 PM
single pulse power unlock wire red (-) driver door module in door Meter this wire while turning the key in the driver door key cylinder ------------- The Shagmaster
1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"
1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER
Installing for over 18 years Looking for empolyment NOW send PM for resum
Posted By: mxxmikexx
Date Posted: October 13, 2006 at 6:18 PM
i know that. i dont want to run wires into door if i dont have to, that was my question
Posted By: shaggy12volt
Date Posted: October 13, 2006 at 6:26 PM
I always do
-------------
The Shagmaster
1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"
1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER
Installing for over 18 years Looking for empolyment NOW send PM for resum
Posted By: Mike M2
Date Posted: October 13, 2006 at 9:28 PM
A factory disarm wire is not needed for any current bodystyle Nissan, including the Maxima. I know, tech sheets say it is but it's not. The ignition turning on from the remote start will disarm with no problems. No keysense needed either....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: mxxmikexx
Date Posted: October 13, 2006 at 9:59 PM
thank you mike m2
Posted By: Chris Luongo
Date Posted: October 14, 2006 at 7:49 AM
Mike M2 is right...... it'll disarm all by itself.
I know you're not doing locks on this one, but go to the carsound.com security forum, do a search for "nissan bcm"........ you will see that there is no need to go into the door in any case.
Posted By: mxxmikexx
Date Posted: October 14, 2006 at 9:26 AM
thanks for the info chris. I guess thats what i get using DEI directwire, they like to make us do things the hard way sometimes.
Posted By: Chris Luongo
Date Posted: October 15, 2006 at 5:40 PM
Yes, they sure do, don't they?
Posted By: mxxmikexx
Date Posted: October 15, 2006 at 6:55 PM
that info on carsound.com was sweet. I remember reading that a long time ago, and am kicking myself now for not remembering that info on all the countless cars i ran wires into the door for doorlocks.
Posted By: Mike M2
Date Posted: October 15, 2006 at 9:08 PM
One of my techs works at a large Nissan dealer practically all week. Talking to him the other day, he said he couldn't remember the last time he ran wires into a door on a Nissan. I turned him onto the Carsound.com Nissan info and he's used it ever since, even found new ones not shown there...
-------------
Mike M2
Tech Manager
CS Dealer Services
|