power lock config.

Trying to install an alarm in a 96 chev 1/2 ton, no keyless entry, what door lock relay diagram do i use??? My alarm puts out neg. pulse...Please help...

1996 Chevrolet Full Size Pickup
Item	Wire Color	Polarity	Wire Location
12V	red	Positive (+)	ignition harness
Starter	yellow or purple	Positive (+)	ignition harness
Ignition	pink	Positive (+)	ignition harness
2nd Ignition	white	Positive (+)	ignition harness
3rd Ignition	pink/white [1]	Positive (+)	ignition harness
Accessory	orange	Positive (+)	ignition harness
Tachometer	white [3]		ECM [4]
Power Door (Lock)	lt. blue	[2]	either door boot
Power Door (Unlock)	white	[2]	either door boot
Door Trigger	purple or ppl/wht	Negative (-)	light switch
Dome Supervision	none	none	none
Headlights	yellow	Positive (+)	at switch
Parklight Positive	brown	Positive (+)	switch or fuse panel
Horn	black	Negative (-)	at column
Brake	white	Positive (+)	at brake pedal switch
Additional Info:
Make sure to enable second ignition wires for remote starts to prevent possible transmission damage and the check engine light from coming on. Diesel glow plug, dk. blue(+) located at the instrument cluster. [1] The pink/white does not exist on all models. [2] 5 wire on the two door models, and positive trigger on the four door and keyless entry models. [3] Tach wire on the 6.5 Diesel is white at the instrument cluster. [4] ECM located on drivers side inner fender well. Two plugs, white wire in plug marked "white".

-------------
J Rilla

Owner/Installer

Thanxs a million guys.. this forum is great!!