R/S Activation
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85591
Printed Date: May 16, 2024 at 10:20 AM
Topic: R/S Activation
Posted By: gpgtp00
Subject: R/S Activation
Date Posted: November 13, 2006 at 9:24 PM
Im working on a 562T for my neighbor. I wanted to give him the option of utilizing his factory remote if he ever wanted too. However, i remember back in the day when i installed my Avantguard 4 on my 00 Grand Prix & had issues. I wired if for double pulse on the lock side and as soon as it would turn on, my factory system would start honking and going off. As you know, 2 pushes of the lock button on the factory remote arms the factory theft system. As soon as it sees the ignition was keyed while being armed and not disarmed prior too, the obvious happens. How do i get past this? Am I only left with the option of wiring it to the unlock trigger? I see these systems wired to the lock trigger all the time on a double pulse without the R/S setting the factory system off. Can someone tell me how this is done? Thanks
Replies:
Posted By: Hymer
Date Posted: November 13, 2006 at 9:47 PM
whats kind of vehicle?
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Posted By: gpgtp00
Date Posted: November 13, 2006 at 9:53 PM
Its a 02 Silverado w/Keyless Entry
Posted By: Hymer
Date Posted: November 14, 2006 at 9:01 AM
To disarm, send a (-)pulse before [unlock or rs] to the light green in the purple connector on the bcm. that will disarm the security system, but not passlock. Youll still need to bypass passlock to rs the truck...
Good luck!
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
|