viper 791problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85793
Printed Date: June 08, 2024 at 4:45 AM
Topic: viper 791problem
Posted By: reefguy
Subject: viper 791problem
Date Posted: November 17, 2006 at 11:07 PM
I had this alarm installed by me few months ago in my wife's 96 lexus es300, everything works perfect. but today when i try to arm the vehicle i get a beeping out of the remote and on the lcd screen pic of the antennae flashes, i checked the switch to ground wire, but nothing, i took out the battery and waited to re=cycle the remote. i couldn't find anything on the troubleshooting in the booklet, also search here and came up empty, so was wondering maybe the program button was pushed in by accident to disable the alarm, is that a possibility?
Replies:
Posted By: swghpu
Date Posted: November 17, 2006 at 11:30 PM
I would reprogram the remote that might help.
-------------
Slade
Posted By: reefguy
Date Posted: November 17, 2006 at 11:33 PM
also the led is not blinking..
Posted By: reefguy
Date Posted: November 17, 2006 at 11:43 PM
reprogram? after pushing the program button what else is needed, cause i'm looking at the owners guide on the program part, but it doesn't have it where it totally disables everything.
Posted By: reefguy
Date Posted: November 18, 2006 at 1:36 AM
well, it just hit me, this morning the battery was low due to leaving the dome light on, but not completely dead. the car was jump started with the portable battery jumper. will this probably short the fuse out, on the brain?
Posted By: reefguy
Date Posted: November 21, 2006 at 8:25 PM
|