I am in the process of Installing a Python 881Xp alarm in my 1995 Camaro Z28. I have a few questions if someone wouldn't mind helping out a newbie. I have the Brain mounted with power and a good ground. The first couple of wires I am trying to hook up are the lock (blue) and unlock (green) wires. I read on a wiring guide that I can use the ORANGE / black and RED / black coming out of the keyless entry reciever. I have tried this, and it does not work. Can someone please explain to me how to hook up these two wires? Does it require a relay?
My other question is about the door switch. I was told to look for a white wire underneath the dash at a courtesy light. I do not have such a light. Does anybody have experience installing alarms in Camaro's? Any help would be much appreciated.
-------------
95 Camaro Z28 LT1
https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1995&make=Chevrolet&model=Camaro&ID=486&type=Alarm
Yes you need relays for the door locks as they are rev. polarity. The door trigger is
DOOR TRIGGER | GRAY (-) | BEHIND LEFT REAR SPEAKER |
-------------
Through research I have found that my car has the 5 wire door locks. Looking at the diagram, I am still confused. The terminals that are confusing me are the 87a and 30. Do I have to cut the wire leading to the motor or can I just splice into it? Can someone please explain this further. Hopefully someone that has installed an alarm in a Camaro before can chime in with some help. Thank you.
https://www.the12volt.com/doorlocks/page3.asp#5w
-------------
95 Camaro Z28 LT1
To the top please.
-------------
95 Camaro Z28 LT1
Any help would be greatly appreciated.
-------------
95 Camaro Z28 LT1