2003 honda pilot disarm wire?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87547
Printed Date: May 23, 2024 at 8:00 AM

Topic: 2003 honda pilot disarm wire?

Posted By: myhuynhvu
Subject: 2003 honda pilot disarm wire?
Date Posted: December 20, 2006 at 3:55 PM

can anyone here please help me find disarm wire for my 03 pilot, the wirring shemethic said the wire is in the door lock cylinder, but i would love to find other options before i have to take the door pannel out and route the wire, every thing is done except the disarm wire, thanks and merry x'mas to all of you...

Replies:

Posted By: advanced
Date Posted: December 20, 2006 at 4:25 PM

There's no easier way to do that unfortunately. Take your time & be careful. It's not that hard to take that door panel apart.

It's the blue wire @ the door key lock cylinder. It will enable you to disarm the alarm without unlocking the doors.

-------------
Good Enough Isn't!

Posted By: KarTuneMan
Date Posted: December 20, 2006 at 4:26 PM

FACTORY ARM

Blue/white or Blue/green

Pin-7 on top center plug in pass. fusebox

This wire will also lock the doors. Models without a passenger side door keyhole will not have a wire in position 7 of the connector. You can put a wire into the plug to operate the alarm.

FACTORY DISARM

BLACK/ red

Pin-3 on top center plug in pass. fusebox

This wire will also unlock the doors with a double pulse. Models without a passenger side door keyhole will not have a wire in position 3 of the connector. You can put a wire into the plug to operate the alarm.

-------------

Posted By: advanced
Date Posted: December 20, 2006 at 4:41 PM

Sorry, I didn't have that info. That's why this site is great. You have lots of experienced guys (& women) as resources.

I agree Merry Christmas is where it's at.

-------------
Good Enough Isn't!

Posted By: myhuynhvu
Date Posted: December 20, 2006 at 7:10 PM

thanks to all of you great and helpful guys here, i think yeah i am going to go for the door pannel, merry x'mas to all and happy new year...