2007 Toyota Tundra security diagram
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89396
Printed Date: May 03, 2024 at 9:44 AM
Topic: 2007 Toyota Tundra security diagram
Posted By: thomasl
Subject: 2007 Toyota Tundra security diagram
Date Posted: January 22, 2007 at 9:27 PM
Does anyone have the wire diagrams for a Toyota Tundra 2007? Im going to install a security system that has keyless entry, remote start, and security. I just dont have the wiring info for the truck. Thanks in advance! Thomas
Replies:
Posted By: KarTuneMan
Date Posted: January 22, 2007 at 9:52 PM
Thats a pretty new one there my friend......you might be on your own for a while....astro, wiremajic, bulldog, and audiovox have ZERO info. DEI might.... -------------
Posted By: thomasl
Date Posted: January 22, 2007 at 10:03 PM
Im sorry- I made a mistake- I meant for a Toyota Tundra- 2006 Model not 2007. Sorry!:(
Posted By: imseth85
Date Posted: January 22, 2007 at 11:00 PM
12volts wht/blue (40A), wht/red (25A) + ignition harness
Starter BLACK/ white + ignition harness
Ignition BLACK/ red + ignition harness
Second Ignition BLACK / YELLOW + ignition harness
Accessory pink + ignition harness
Keysense YELLOW /GREEN - ign harn or BECU, black plug, pin 22 Notes: Using the status output wire from the remote start to trigger this wire will disarm the alarm without unlocking the doors.
The BECU (Body ECU) is above the driver kick panel, towards the firewall.
Power Lock see DirectFax document 1070
Power Unlock see power lock
Parking Lights+ green + driver kick, harness to rear
Parking Lights- green - switch or BECU, white plug, pin 14
Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall.
Door Trigger blue/red (ajar indicator) - BECU, white plug, pin 1
Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall.
The individual door trigger wires are also at the BECU. The LF door is gray/red, gray plug, pin 15. The RF door is lt. GREEN/ black, black plug, pin 8. The LR door is RED / white, gray plug, pin 16. The RR door is RED / white, black plug, pin 4. Use all four wires and diode isolate each.
Dome Supervision blue/black - ignition key cylinder illumination
Notes: Also found at the BECU, gray plug, pin 8.
The BECU (Body ECU) is above the driver kick panel, towards the firewall
Hood Pin blue/white - pin sw. or BECU, white plug, pin 5
Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall.
Tachometer black ac ECM, 2nd plug from right, pin 1
Notes: The ECM (Engine Control Module) is behind the glove box
Brake Wire WHITE/ red or GREEN / WHITE + brake pedal switch
Parking Brake lt. GREEN/ red - switch or BECU, black plug, pin 3
Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall.
Horn Trigger BLACK / YELLOW - switch or BECU, black plug, pin 21
Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall.
This is for the doorlocks
https://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1070.pdf
------------- Seth Alvo NY
Mobile Electronics Installer
Posted By: Mike M2
Date Posted: January 23, 2007 at 6:35 AM
The above diagram is for the 4 door only. The 2 door and ext cab are very different. Which do you have?
------------- Mike M2
Tech Manager
CS Dealer Services
Posted By: thomasl
Date Posted: January 23, 2007 at 6:12 PM
Mike Thanks alot! I have the 4 door- I think this will do! Thanks so much!!
Posted By: KarTuneMan
Date Posted: January 23, 2007 at 6:42 PM
ShaZAM.......
-------------
|