06 Sienna factory remotes while running?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89572
Printed Date: October 31, 2024 at 6:04 PM
Topic: 06 Sienna factory remotes while running?
Posted By: csorb
Subject: 06 Sienna factory remotes while running?
Date Posted: January 26, 2007 at 1:30 AM
Hi. I have been told that there is a way to allow the factory remote to work even once the car is running.(we did a one button remote starter) Has anybody done this or have info? Thanks
Replies:
Posted By: mobilecustoms
Date Posted: January 26, 2007 at 5:44 AM
toyotas cant use factory remotes when running.
-------------
Posted By: Chris Luongo
Date Posted: January 26, 2007 at 6:24 AM
Already tried it on a Sienna.
I found one wire at the BCM I could interrupt, and then the keyless did work.......but I also got all kinds of warning lights on the dash, and it also killed the climate controls, so that isn't going to fly.
One-button remote starters are a lousy idea on Japanese cars.
Posted By: Mike M2
Date Posted: January 26, 2007 at 6:40 AM
Now i wouldn't say all Jap cars, Nissans still work if they are running....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: KarTuneMan
Date Posted: January 26, 2007 at 8:19 AM
Japanese....Japanese..... come on, be a bit P.C.  This coming from a Russian Jew....... -------------
Posted By: Mike M2
Date Posted: January 26, 2007 at 6:05 PM
Hehehe, sorry for the Bill Parcells type comment. You can call me a Pol if ya like....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: concepts99
Date Posted: January 27, 2007 at 9:00 PM
Does anyone know if the inputs for the sliding doors and trunk with an AFTERMARKET negative pulse will still work after the Sienna is remote started?
Posted By: mobilecustoms
Date Posted: January 28, 2007 at 8:19 AM
with an aftermarket remote- yes
factory remote will not work
-------------
Posted By: Mike M2
Date Posted: January 28, 2007 at 9:39 AM
The override switch under the dash has to be plugged in and turned on, but the pulses will open and close them all....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: csorb
Date Posted: January 28, 2007 at 1:27 PM
Thanks everybody. My customer walked into a shop who told him that they could do it and whoever put in the system was second class. Maybe they were just talking big...maybe not. Mike what did you mean by the overide switch?
Posted By: Mike M2
Date Posted: January 28, 2007 at 2:52 PM
Concepts99 was asking about the sliders opening, there's an override switch on the kee bolster that must be plugged in and on for them to work....
-------------
Mike M2
Tech Manager
CS Dealer Services
|