Print Page | Close Window

omega pass 4 and ultrastart 1270tl

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89666
Printed Date: October 31, 2024 at 6:47 PM


Topic: omega pass 4 and ultrastart 1270tl

Posted By: peterubers
Subject: omega pass 4 and ultrastart 1270tl
Date Posted: January 27, 2007 at 10:42 PM

Vehicle: 2001 Nissan Pathfinder.

The Ultrastart has an 3-pin auxillary port (GWR(-), (+)250mA 12v, (-)250mA Ground), and the Omega Pass-4 has a three pin connector: Red +12v, Green - keysense, Black (-).

Can I connect the Ultrastart GWR wire to the Omega Black wire, and the Red Ultrastart +12v (250mA) wire to the Red Omega wire?

Or ...

Do I need to provide a higher current +12v source for the Omega unit?

And..

Will my GWR from the Ultrastart unit give a (-) signal while cranking as well?  If not, I'll have to set up a relay to chassis ground triggered by the ignition wire.

Thanks!



-------------
The search function is your friend.



Replies:

Posted By: jmacf14
Date Posted: January 28, 2007 at 12:08 AM

that aux. output will work just fine as you stated. You shouldn't have to wire relays.



-------------
jmacf14




Posted By: peterubers
Date Posted: January 29, 2007 at 9:28 AM
Thanks for the reply -- I'll give it a go this weekend!

-------------
The search function is your friend.




Posted By: jmacf14
Date Posted: January 29, 2007 at 8:39 PM

let us know how it goes



-------------
jmacf14





Print Page | Close Window