security light 2000 grand am

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8980
Printed Date: June 10, 2024 at 9:42 AM

Topic: security light 2000 grand am

Posted By: edl56
Subject: security light 2000 grand am
Date Posted: February 02, 2003 at 9:06 PM

just installed remote start on this car,all works fine starts with remote and with key, but after you remote start it and turn key on security light comes on , it doesnt seem to be affecting anything or is it ? thanks

Replies:

Posted By: joyride2k
Date Posted: February 02, 2003 at 9:25 PM

What are you using to bypass PL2?

Posted By: edl56
Date Posted: February 02, 2003 at 9:30 PM

using 2 relays to bypass tried 3 different resistors security light still coming on

Posted By: PLAYER69
Date Posted: February 02, 2003 at 10:26 PM

how close are your resistor values? That is your problem. It has to be very close.

Posted By: jrilla
Date Posted: February 02, 2003 at 10:53 PM

turn your key to start before hitting the brake. Your starter will not grind.

-------------
J Rilla

Owner/Installer

Posted By: PLAYER69
Date Posted: February 02, 2003 at 11:01 PM

How do you have the bypass hooked up?

Posted By: romadoor
Date Posted: February 03, 2003 at 7:34 AM

retest your ps2 wires and see if resistance is in the "run position only" or "start position only" or " both positions" you may have to hook your relays to work in the "start position only" for that year of car. ps2 gets a little funny from year to year.

Posted By: edl56
Date Posted: February 09, 2003 at 7:50 PM

well i checked resistance again in start posistion and i have right resistor, but what i did find was i had a bad coil in relay , put nother relay in all is working great now, thanks for all the help

Print Page | Close Window