89 240sx , compustar cm3000 starter prob

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91212
Printed Date: May 17, 2024 at 6:06 PM

Topic: 89 240sx , compustar cm3000 starter prob

Posted By: jbody
Subject: 89 240sx , compustar cm3000 starter prob
Date Posted: March 02, 2007 at 10:23 PM

hey there, as the topic states

i have an 89 240sx and i'm trying to install a compustar CM3000.
-> problem is that i can start the car with key, but when i try to start it with the remote, it tries to crank it and it just keeps turning but will not turn over, i'm kind of lost at what i should do thanks.

this is how my wiring is wired up

brain -> car
yellow -> BLACK / YELLOW (starter side)
yellow/black -> BLACK / YELLOW (keyside)
green -> BLACK/ white
white -> blue

now i got a nice tach signal since the brain chirps once confirming so.

Replies:

Posted By: Velocity Motors
Date Posted: March 02, 2007 at 10:42 PM

THis is what you should have done:

CM3000 / CAR
GREEN / BLACK/ RED
BLUE / BLACK / YELLOW

The starter wire is actual the BLACK/ WHITE in the ignition harness. YOu have the wrong starter wire and the wrong ignition wire. That's the problem.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: jbody
Date Posted: March 02, 2007 at 10:47 PM

hey velocity

i don't have a BLACK/ red

i have BLACK/ green, BLACK / YELLOW, BLACK/ white, and WHITE/ red

so would i use BLACK/ green opposed to BLACK/ red?

Posted By: jbody
Date Posted: March 02, 2007 at 10:54 PM

i don't believe there is a blue wire? unless the white was suppose to go the BLACK / YELLOW