Print Page | Close Window

Lynx 2000 Install Help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9130
Printed Date: May 31, 2024 at 6:26 PM


Topic: Lynx 2000 Install Help

Posted By: thefranchise
Subject: Lynx 2000 Install Help
Date Posted: February 05, 2003 at 11:42 PM

Hi all.  I am upgrading from a Aladdin 2000 to a Lynx 2000 alarm. 

The Aladdin 2000 had a specific output (-) for activating a transponder bypass box during the remote start process only.   For some unknown reason the new verion Lynx 2000 does not have such an output.

What would be the PROPER way to securly hookup the box so that one could not simply hotwire and energize the unit?  The box should only be engergized during a remote start until the car starts.  Is there a way?




Replies:

Posted By: Velocity Motors
Date Posted: February 06, 2003 at 2:19 PM
Use the 2nd ignition wire from the P6 harness ( BLUE / BLACK ) for the transponder bypass module.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window