camry 07 immobilizer, how to disable?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91474
Printed Date: June 15, 2024 at 8:42 PM
Topic: camry 07 immobilizer, how to disable?
Posted By: legenux
Subject: camry 07 immobilizer, how to disable?
Date Posted: March 09, 2007 at 3:39 PM
I was told camry 07 has immobilizer, and will not let the starter engage when its on. How can I shut down the < face=OfficinaSans-Book >immobilizer system for remote starting? Thanks.
Replies:
Posted By: rudydapimp
Date Posted: March 09, 2007 at 4:51 PM
get the XK05 from bypasskits.com. reliable bypass.
Posted By: legenux
Date Posted: March 09, 2007 at 5:14 PM
I have the 556U. I guess I was asking besides the 556U, do I have to tap into the blue sense wire with ground to disable alarm? Thanks.
Posted By: peterubers
Date Posted: March 10, 2007 at 9:51 AM
supply the keysense wire with a NEG(-) or POS(+) (read the wiring diagram to determine what polarity the keysense wire needs .. i cannot recall) that is triggered by your Ground While Running (-) wire off the Remote start brain -- also, diode isolate your GWR(-) connection to your 556U if you use the same GWR wire to trigger both things.
-------------
The search function is your friend.
Posted By: Mike M2
Date Posted: March 10, 2007 at 11:15 AM
The keysense wire is blue at the column and needs to see a ground whenever the Rs is on.
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: soultinter
Date Posted: March 10, 2007 at 11:36 AM
that is only to disarm the factory alarm, not the immobilizer system (which is the chip in the key) the 556u will do that.
Posted By: Mike M2
Date Posted: March 10, 2007 at 1:21 PM
legenux wrote:
I have the 556U. I guess I was asking besides the 556U, do I have to tap into the blue sense wire with ground to disable alarm? Thanks.
That's pretty much what he asked.... ------------- Mike M2
Tech Manager
CS Dealer Services
Posted By: KarTuneMan
Date Posted: March 10, 2007 at 6:50 PM
Remember...you need to trigger BOTH, with ground while running (remote started). If you use ONE GWR, diode isolate the 2 "features" keysence, and transponder bypass.
-------------
Posted By: legenux
Date Posted: March 10, 2007 at 8:48 PM
Thank you. I will try this tomorrow.
|