2000 chrysler town and country, r/s
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91478
Printed Date: June 06, 2024 at 6:43 PM
Topic: 2000 chrysler town and country, r/s
Posted By: Zeplin1073
Subject: 2000 chrysler town and country, r/s
Date Posted: March 09, 2007 at 3:57 PM
Just put in a auto page rs662 into a 2000 chrysler town and county. followed the tech sheet for the locks but it does have a foctory alarm but the resistors of 4020 lock and 665 unlock did not work, but 1500 lock and 250 unlock did. problem is this every so often the factory alarm goes off when the doors are unlocked by the alarm. has anyone heard of this? did i connect the wrong lock wires? oh yeah when I started this job the factory alarm was acting a bit strange since whenI went to get in the car and used the key to unlock the door it immediatly locked again and I had to giggle it a bit to unlock. any help would be appreciated.
Replies:
Posted By: Velocity Motors
Date Posted: March 09, 2007 at 8:15 PM
What wire did you tap into for the OEM alarm disarm/unlock / arm/lock ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Zeplin1073
Date Posted: March 09, 2007 at 9:20 PM
WHITE/ green under fuse box.
Posted By: Velocity Motors
Date Posted: March 09, 2007 at 11:43 PM
There's a WHITE/ GREEN and a WHITE/ DARK GREEN.... which one did you tap into & Did you test the wire with a DMM ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Zeplin1073
Date Posted: March 10, 2007 at 8:55 AM
I grabbed the WHITE/ green and tested it with a dmm and it tested right. let me guess I grabbed the wrong wire.
|