toyota supra door locks and trigger
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91826
Printed Date: April 27, 2024 at 12:52 PM
Topic: toyota supra door locks and trigger
Posted By: c.c.autospa
Subject: toyota supra door locks and trigger
Date Posted: March 18, 2007 at 8:19 AM
Im installing a clifford 770 on a 93 supra and am having trouble getting the door locks and door trigger to work. I have the wiring diagram and have found and tested the wire that the diagram says is for the door locks and door trigger, but dont get a reading that tells me these are the correct wires. Could someone help me out with this problem. Thanks!
-------------
CEDRIC
Replies:
Posted By: Twelvoltz
Date Posted: March 18, 2007 at 10:43 AM
From DEI:
Power Lock GREEN/ YELLOW - either kick panel
Power Unlock blue/black - either kick panel
These wires will either rest at +12V or rest at nothing and go to ground when pressing lock and unlock.
Door Trigger RED / white - drivers kick panel
This wire will rest at +12V and go to ground when either door is open.
If the wires you are testing do not behave as listed you have the incorrect wires.
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: c.c.autospa
Date Posted: March 25, 2007 at 10:05 AM
Thanks for your help. I got the door locks to work and the door trigger wire. Unfortunately, it wasnt the wires that the wire diagram told me. I just tested 5-10 different wires until I found the correct ones.
-------------
CEDRIC
|