intrusion pager alarm needed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93649
Printed Date: September 20, 2024 at 7:20 PM

Topic: intrusion pager alarm needed

Posted By: Altimat
Subject: intrusion pager alarm needed
Date Posted: May 05, 2007 at 9:21 PM

I need a simple silent intrusion pager alarm with a photo-sensor similar to what a garage door would use or some other reliable sensor that would detect a person's presence in a confined area but not be sensitive to other small movements or shocks. Can someone receommend a simple way to put something like this together with commercially available products and cheap? I don't need any other functions such as alarm siren, remote start, etc.

Thanks!

Replies:

Posted By: tragik
Date Posted: May 07, 2007 at 3:23 PM

I would suggest that you get a 2-way alarm system and wire a perimeter sensor to it. DEI makes a decent proximity sensor, but the part number is escaping me at the moment. if you don't want the intruder to know that you know he is there, just don't hook up the siren and light flash functions of the alarm, so the only indication that a violation of the system has occurred would be on your remote.

-------------
Northstart.....or start it your damn self.

Posted By: sarcomax
Date Posted: May 08, 2007 at 11:45 AM

The relay clicking would still be there if the brain unit has a built in parking light system even if the lights are not hooked up. subtle, but a thief will recognize it.

Posted By: tragik
Date Posted: May 09, 2007 at 2:07 AM

Solution: Open the unit, and disable the P.Light relay.

-------------
Northstart.....or start it your damn self.

Print Page | Close Window