2000 3 series bmw325i brake wire?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93785
Printed Date: May 28, 2024 at 9:10 PM
Topic: 2000 3 series bmw325i brake wire?
Posted By: dcman41
Subject: 2000 3 series bmw325i brake wire?
Date Posted: May 10, 2007 at 1:25 PM
im in the middle of hooking up a alpine in dvd player and i cant find the stupid brake wire directechs lists it as brown.white at brake pedal switch. but theres no brown and white at the switch, so i tested every single wire with the brake pedal and only one lit up the test light, but it was a consant. Any help would be appreciated thanks in advance
Replies:
Posted By: enice
Date Posted: May 10, 2007 at 1:49 PM
try using a dmm not test lights. DMM are safe. Question here, do you want to connect it to the brake and or do you want to use a video bypass for your alpine system. Using that wire on the brake will only let you watch a dvd when your car is parked and the brake on.
Posted By: dcman41
Date Posted: May 10, 2007 at 2:15 PM
i used a dmm, and i got continuity when the brake pedal was pressed, and nothing when unpressed. So i used that wire, I am trying to do the video bypass by hooking up like this.... Footbrake wire to footbrake on headunit, then parking brake wire to a switch with +12v, and a ground with the parking brake connected to the ground end. But it is still not working :\
Posted By: enice
Date Posted: May 10, 2007 at 2:40 PM
State the model of the alpine radio.. As far as I know you would use a TR7 to bypass alpines.
Posted By: dcman41
Date Posted: May 10, 2007 at 3:18 PM
I have one, however.... I keep getting this error I/F BOX ERROR. Its a cva 1004
Posted By: howie ll
Date Posted: May 13, 2007 at 11:41 AM
Why do you need to connect bake wire? They mean parking brake which easiest reached via parking bake cover (remove to see switch and connect); usually we ground that wire otherwise screen will only come on when vehicle parked with hand (parking ) brake on. N.B. The wire at the footbrake switch on a n E46 is CAN and wont give you 12V+!
Posted By: enice
Date Posted: May 13, 2007 at 11:53 AM
Alpine radios are different. Connecting brake wire to ground will do nothing. Using a TR7 or something comparable will unlock the radio to view while driving. To program the TR7 you would connect the black wire to ground and the red wire to acc.Slide the TR7 switch to on and turn the key to ign and tap the brown wire 2 times to ground. After that you slide the switch off and connect the blue wire from the tr7 to the yellow/black from the radio, the white wire to the yellow/blue wire of the radio and the green wire to the blue/white wire of the radio. Turn off the car and turn on and it should bypass.
Posted By: tragik
Date Posted: May 14, 2007 at 2:33 AM
I believe that the ignition must be on to get 12 volts on the brake wire in this car. Do the breake lights go on when you hit the brake with the ignition off? If not, just test for your wire with the ignition on. Or just tag your brake wire at the bulb if you still cant find it.
-------------
Northstart.....or start it your damn self.
|