Print Page | Close Window

factory lock motor died now aftermarket

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94365
Printed Date: June 09, 2024 at 12:45 PM


Topic: factory lock motor died now aftermarket

Posted By: craniumvibratio
Subject: factory lock motor died now aftermarket
Date Posted: May 30, 2007 at 1:32 AM

I have a 98 sonoma and my factory door lock motor is dying and I have a couple of aftermarket actuators sitting around. oh and for the alarm i have a viper 791xv.   I want to install an aftermarket actuator,and for one because I have on and the dealer makes you take it deep. Either way can anyone fill me in on how I should wire the relay. or even if i need one? Oh and for the door lock relay I believe I installed the dei door lock relay pack. I cant remember the model number. So I guess what im asking is if someone can tell me how I should hook this up.
Thanks in advance
Brandon



Replies:

Posted By: drvnbysound
Date Posted: May 30, 2007 at 2:58 AM
You shouldn't need to add any relays, etc. Just tap into the factory actuator wiring.


Print Page | Close Window