Print Page | Close Window

88 dodge shadow power locks.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96350
Printed Date: May 29, 2024 at 6:22 PM


Topic: 88 dodge shadow power locks.

Posted By: raccoon
Subject: 88 dodge shadow power locks.
Date Posted: August 12, 2007 at 3:58 PM

Ive just installed a remote starter some cheaper one from Canadian tire.
https://www.autostart.ca/prostart/prod-en_CT-3200.php

anyway I got the remote starter working just perfect, now I want to use the remote power door lock option. the unit can send out negative pluses on 2 separate wires for lock and unlock.

heres a diagram of the cars locking system, I cant figure out what kind of relay setup im going to need. 2 wire 3 wire power system, vacuum system im just more confused now.

posted_image

point me in the right direction :)


Paul



Replies:

Posted By: raccoon
Date Posted: August 12, 2007 at 3:58 PM
oh and the car is a 2 door while the diagram is for a 4 door car, but that shouldn't change much.




Posted By: captainzab
Date Posted: August 12, 2007 at 4:38 PM
1987-1990 Dodge Shadow

POWER LOCK        ORANGE (TYPE C)        IN DRIVERS KICK PANEL
POWER UNLOCK       PINK (TYPE C)       IN DRIVERS KICK PANEL

Type C is reversing polarity
posted_image
https://www.the12volt.com/getimage/5wap.gif

-------------
Note: You Always Dont Get What You Pay For.




Posted By: fkelsey
Date Posted: August 12, 2007 at 4:46 PM
According to my diagram in your car lock is lock is orange and unlock is pink both are 5 wire and in your driver kick panel. I am assuming this is right it has been a long time since I have even seen a Dodge Shadow. Wire your relays like this, cut your lock and unlock wires in two. Lock relay 85 negative trigger from your RS, 86 and 87 12 volts, 87a switch side of lock wire, 30 motor side of lock wire. Do the same for your unlock relay.




Posted By: raccoon
Date Posted: August 12, 2007 at 7:39 PM
fkelsey wrote:

I am assuming this is right it has been a long time since I have even seen a Dodge Shadow.



lol yea not too many left its just a project car, Ill wire it up tomorrow with some relays and let you know how it went, thanks.

posted_image
posted_image

I remember seeing them when they were new and wanted one sooo bad.




Posted By: fkelsey
Date Posted: August 12, 2007 at 7:48 PM
posted_image posted_image To each his own lol. When you finish pumpin your ride let us see how it turned out. Thanks for the pics that really took me back to the days of hair metalposted_image.




Posted By: raccoon
Date Posted: August 16, 2007 at 2:04 PM
well it worked great, but I might add the wires were not in the kick panel.

after they enter through the grommet the harness shoots strait up and runs along the top of the dash just under the windscreen.

its a good thing I had the dash board removed, or it wouldn't of been installed.





Print Page | Close Window