factory security light stays on
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96362
Printed Date: October 31, 2024 at 6:55 PM
Topic: factory security light stays on
Posted By: Fosgate3
Subject: factory security light stays on
Date Posted: August 13, 2007 at 10:33 AM
I installed a Code Alarm CA670 on a 2005 Pontiac G6. Everything works well on but the factory security light comes on and stays on if you start it with the alarm's remote start feature. Any ideas?
Replies:
Posted By: swerks
Date Posted: August 13, 2007 at 11:33 AM
check your bypass wiring and programming
------------- Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta
Posted By: NowYaKnow
Date Posted: August 13, 2007 at 6:47 PM
Yeah you didn't mention what type of bypass you used. One of the data modules or a key in the box type?
Mike
Posted By: Fosgate3
Date Posted: August 13, 2007 at 7:56 PM
sorry.. it was a peripheral xk06 with the pkg7 flashed on it. the owner bought one from a company online, wouldnt program, he sent it back and got this one which programmed fine but now the factory security light stays on. everything works, just that is a nuisance.
Posted By: swerks
Date Posted: August 13, 2007 at 9:20 PM
Fosgate3 wrote:
sorry.. it was a peripheral xk06 with the pkg7 flashed on it. the owner bought one from a company online, wouldnt program, he sent it back and got this one which programmed fine but now the factory security light stays on. everything works, just that is a nuisance.
ensure that it has been flashed with the pkg7 2.0 firmware you can also find a manual for this module at bypasskits.com ------------- Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta
|