alpine 8040 vs 8440

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96581
Printed Date: June 02, 2024 at 2:48 AM

Topic: alpine 8040 vs 8440

Posted By: davidds
Subject: alpine 8040 vs 8440
Date Posted: August 22, 2007 at 5:13 PM

I wanted to know if the reomote for the alpine 8440 is compatible with the 8440. The only difference I noticed between the 2 are the fcc id: 8040: A269ZUA097, 8440: A269ZUA096.

I was told by a couple venders that the remote for the 8040 is discontinued. Any help would be great.

Thanks in advance

Davidds.

REMOTE MADE FOR: ALPINE

®BUTTON: 2LED or LIGHT: RED

FCC ID: A269ZUA096

P/N - MODEL: SEC-8440

REPLACEMENT TRANSMITTER: new style with same functions

Replies:

Posted By: bmfsiii
Date Posted: August 27, 2007 at 10:07 PM

Dose the remote for the 8440 look like the one for the 8040? If it dose, then the remote should work with it. It would just need to programmed to the alarm. If you need a new remote try this web site, autotechs.com and search for alpine alarm remotes. If you have any other questions, let me know.

Posted By: davidds
Date Posted: September 04, 2007 at 11:52 AM

I don't have the remote. The alarm came installed with the Fiero I purchased. The only thing I'm concern about is the FCC number on the brain. It's A269ZUA097 and the remote is A269ZUA096. Will that still work?

Thanks

Posted By: bmfsiii
Date Posted: September 05, 2007 at 7:52 AM

Is the alarm an alpine 8040? If it is the 8440 remote will work with it. Autotechs.com should have the remote. I can help you with programming it if need be.

Print Page | Close Window