remote starter for a 2002 trailblazer
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9670
Printed Date: May 13, 2024 at 3:48 PM
Topic: remote starter for a 2002 trailblazer
Posted By: nick2169
Subject: remote starter for a 2002 trailblazer
Date Posted: February 17, 2003 at 7:14 PM
i am wanting to install a remote starter on my truck and was wondering how complicated it would be.
Replies:
Posted By: Velocity Motors
Date Posted: February 17, 2003 at 8:07 PM
Get the proper byapss and lock interface with the RS and it's a snap ( less than 2 hours work with previous experience & about 4 hours without any experience ). The bypass of choice would be the PLDATA & the GMDL1.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Chris Luongo
Date Posted: February 17, 2003 at 9:08 PM
The Trailblazer is a popular vehicle; it comes up here almost every week. Have you already done a search?
Posted By: nick2169
Date Posted: February 17, 2003 at 10:03 PM
no chris i have not what do u recomend?
Posted By: Chris Luongo
Date Posted: February 18, 2003 at 5:18 PM
It's always wise to do a search first. We pros love coming here to help people and answer questions, but we tend to get bored and leave if we have to answer the same question every week.
Forum Rules and Guidelines This basically explains the same thing, although more politely.
Anyway, search for old posts about your car; they'll probably answer all or most of your questions. Try spelling out your search as "trailblazer" and "trail blazer"---you might find different posts under each spelling.
If you then have specific questions that those posts don't address, feel free to ask away.
Posted By: nick2169
Date Posted: February 19, 2003 at 8:06 PM
what about the IPPME? is that suiteable to by pass the locks and the pass lock both? https://www.12voltshop.com/proddetail.asp?prodid=IPPME&cat=1311&path=1,1311
Posted By: Velocity Motors
Date Posted: February 20, 2003 at 8:04 AM
Yes it will work, but for the same price and less installation time go for the PLDATA ( only 4 wires ) instead of 8 off the IPPME.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: PLAYER69
Date Posted: February 20, 2003 at 8:16 AM
Vote #2 for PLDATA!
Posted By: nick2169
Date Posted: February 21, 2003 at 10:45 AM
ok i bought a DirectStart 423 (CS423) remote starter for my trailblazer. i bought the gmdl1 and the pldata. all i still need to know is are they still needed for the install of this system.
Posted By: Velocity Motors
Date Posted: February 21, 2003 at 10:54 AM
Yes, the two bypasses are need for the installation & bypass of the Passlock & the doors interface.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: nick2169
Date Posted: February 26, 2003 at 7:54 PM
ok all of the bypasses and the model came in but i cant figure out why both of the bypasses have the same wireing harness and how to connect it all.
Posted By: Velocity Motors
Date Posted: February 26, 2003 at 8:32 PM
Did they not come with wiring diagrams ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: nick2169
Date Posted: February 26, 2003 at 8:55 PM
kinda but not good ones
Posted By: nick2169
Date Posted: March 03, 2003 at 9:40 PM
What do you reccomend for the correct order to insall everything on my remote starter and relays (gmdl1 and pldata)? Also, the remote starter is a direct start 423c
Posted By: jrilla
Date Posted: March 03, 2003 at 10:13 PM
The wire harnesses are universal, dont be alarmed by this it is not confusing, just cut off the smaller connector that does not get used, then install it like the diagram shows.
As far as order for installing. Since this is your first time, I would spend tiem inside connecting your remote starter wires to your GMDL1 and PLDATA, cutting the unused wires shorter and taping them off so they do not confuse you during the install. The PLDATA is the last thing to install, but you can install 3 of the 4 wires at the same time you install the starter since you will already be working on a ground, power and (-) out when running. Like I said I would spend all the time you need before hand making wire connections that need to be made between the starter and the two modules since they share common needs. Read the instructions on the GMDL1 and the PLDATA and make sure you follow those.
The more time you spend preparing this, the less tiem you will spend under the dash breaking your back.
-------------
J Rilla
Owner/Installer
Posted By: nick2169
Date Posted: March 04, 2003 at 8:30 AM
where can i get the most detailed wiring diagram for my trailblazer.or could some one send me one that is great
Posted By: Velocity Motors
Date Posted: March 04, 2003 at 3:37 PM
Give me your email addy and I will send you one.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|