2005 honda civic 5spd pkh3

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97093
Printed Date: May 29, 2024 at 1:31 AM

Topic: 2005 honda civic 5spd pkh3

Posted By: e10tran
Subject: 2005 honda civic 5spd pkh3
Date Posted: September 12, 2007 at 6:30 PM

Hello everyone,

I am having trouble installing a CODE ALARM PKH3 and getting it to work. I have wired up everything correctly i believe and the brown wire to 200mA remote status output of the 4 pin. I am installing the PKH3 on a DEI Autocommand 20095 alarm. I can start the car with the key but the engine just struggles with the remote start. What am i doing wrong?

Thanks

Replies:

Posted By: KarTuneMan
Date Posted: September 12, 2007 at 7:22 PM

your autocommand is NOT for manual trans.

-------------

Posted By: dswift
Date Posted: September 13, 2007 at 12:57 PM

WORD!

-------------
"dont ground out!"

Posted By: KarTuneMan
Date Posted: September 14, 2007 at 8:48 AM

e10tran..... have you givin ANY thought into NOT using this remote start on your 5 speed?

-------------

Print Page | Close Window