2005 dodge caravan remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98140
Printed Date: June 01, 2024 at 12:46 AM
Topic: 2005 dodge caravan remote start
Posted By: henrylfair
Subject: 2005 dodge caravan remote start
Date Posted: October 20, 2007 at 1:48 PM
Do anybody know the easiest place to connect to the tach wire or oil sense wire cant get a good tach signal
-------------
Henry Fair
Replies:
Posted By: Twelvoltz
Date Posted: October 20, 2007 at 3:49 PM
Use a fuel injector, they will have a common colored wire at each use one of the odd colored wires at any injector.
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: henrylfair
Date Posted: October 20, 2007 at 5:53 PM
hey direction on here say use pin 21 for parking lights - activation but installer software say to use WHITE/ orange wire and it is +activation anyone knows which is correct
-------------
Henry Fair
Posted By: Twelvoltz
Date Posted: October 20, 2007 at 6:21 PM
For positive trigger parking lights DEI shows the WHITE/ orange as the right side only with a WHITE/ brown for the left side located in the driver's kick, harness to the rear.
They list the WHITE/ brown negative through a 2.1k resistor isolated from the switch.
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: henrylfair
Date Posted: December 30, 2007 at 12:11 PM
Can any one give me suggestions on remote start that works well with the dodge Grand caravan in price range of $100- $200 i will be using the XK532 interface module Happy New Years to All!!!!!!! ------------- Henry Fair
Posted By: henrylfair
Date Posted: December 31, 2007 at 9:11 PM
Do any one know if you still need to use the door triger resistor when interfacing with XK532 or do the XK532 handle the door unlocking and locking witout the resistors
-------------
Henry Fair
Posted By: tonyberg
Date Posted: December 31, 2007 at 9:12 PM
it handles the lock unlock withOUT resistors
Posted By: henrylfair
Date Posted: December 31, 2007 at 9:24 PM
ok thanks were can i get the oil pressure or alternetor wire on 2005 dodge grand caravan also the best way to glab the parking lights wire
-------------
Henry Fair
Posted By: tonyberg
Date Posted: January 01, 2008 at 11:45 AM
i am unsure of the oil pressure or alternator wire...if you are just looking for a tach signal you can utilize the blue wire with a stripe at the back of the coil packs. Parking lights are WHITE/ orange in the driver kick panel , they are positive here
Posted By: henrylfair
Date Posted: January 12, 2008 at 11:21 AM
can any one help me out the xk532 say hook the data wire up to the white and orange wire on the skim but their only four wire and neither wire is white and orange
-------------
Henry Fair
Posted By: tonyberg
Date Posted: January 12, 2008 at 11:49 AM
On an 05 Caravan, you need to reflash the XK532 for CHDL6+ 2.0, and then download the new install instructions, you connect the purple data wire to the WHITE/ purple wire in pin 2 of the DLC
Posted By: henrylfair
Date Posted: January 12, 2008 at 1:31 PM
dont know what is meant by reflash it say it chdl7 and what is dlc do you mean data link cable how do i reflash
-------------
Henry Fair
Posted By: BNLUIS
Date Posted: January 12, 2008 at 4:55 PM
henrylfair wrote:
dont know what is meant by reflash it say it chdl7 and what is dlc do you mean data link cable how do i reflash
The xk532 is an upgradeable module you will need to download the right software to operate on your car. But you will need a data cable XKloader https://www.bypasskit.com/product.aspx?prodid=XK532 ------------- Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
Posted By: Chris Luongo
Date Posted: January 12, 2008 at 6:24 PM
And once you get the correct firmware installed into the module, you can find the correct install instructions at:
www.expressdownload.com
Close to the top right, click on Install Guides.
Again, ignore the literature that comes with the product, and refer to the manual that matches up with the firmware you've installed.
Posted By: henrylfair
Date Posted: February 16, 2008 at 8:40 AM
Do any one knows if parking lights have to be hooked up using the xk532 on 2005 grand caravan or would the interface module handle it and were is the best place to pick up tack signal
-------------
Henry Fair
Posted By: tonyberg
Date Posted: February 16, 2008 at 9:52 AM
Yes parklights have to be hooked up the module doesnt do them. You can grab park lights positive WHITE/ orange stripe in the drivers kick panel. Tach is best grabbed blue/stripe at the coil pack on the engine
Posted By: henrylfair
Date Posted: February 16, 2008 at 10:21 AM
ok thank you i let you know how it go
-------------
Henry Fair
|