Print Page | Close Window

compustar pro series

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98183
Printed Date: October 31, 2024 at 5:55 PM


Topic: compustar pro series

Posted By: drew215
Subject: compustar pro series
Date Posted: October 15, 2007 at 9:03 AM

I am installing in a 2004 acura tl. I install the remote start and trunk pop with this system. What color are the wires for the aux1 and aux2 channels on the brain? and how do I set it up. What menu functions is there? I used up the button 2 which is remote start and button 3 which is trunk pop. Is that considered the two aux output? I'm confused here. i'm trying to roll the windows up and down? What are my options?
Thanks guys



Replies:

Posted By: Velocity Motors
Date Posted: October 15, 2007 at 9:27 AM
All information is on the back of the CPU. Also, the programming options are easy done through the Option programmer and without the OP, changing out the options on the PRO series is an absolute pain in the rear.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: drew215
Date Posted: October 21, 2007 at 9:01 PM
How can I change the wire over to use the aux channel
What menu is this ?




Posted By: Twelvoltz
Date Posted: October 21, 2007 at 10:11 PM
There are a few Compustar manuals in the downloads section. See if your manual is there, if not post the exact model of your system and a better description of what you are trying to do. Someone here is bound to know how to assist you.

-------------
Installer, IT support, and FFL. I need less hobbies.




Posted By: Velocity Motors
Date Posted: October 22, 2007 at 12:07 AM
Please elaborate.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: JWorm
Date Posted: October 22, 2007 at 12:10 AM
Do you have an Option Programmer? If not....good luck.





Print Page | Close Window