07 camry ecu
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98463
Printed Date: June 11, 2024 at 11:35 PM
Topic: 07 camry ecu
Posted By: tintman97
Subject: 07 camry ecu
Date Posted: October 30, 2007 at 11:15 AM
Where is this under the dash on the passenger side i found it under the hood. I dont wanna cut in there. build date of 02-06 4 cyl camry
using a Im05
sNAPPER
Replies:
Posted By: tintman97
Date Posted: October 30, 2007 at 11:28 AM
These instructions are a joke this is crap IM05
Snapper
Posted By: KarTuneMan
Date Posted: October 30, 2007 at 12:08 PM
tintman97 wrote:
Where is this under the dash on the passenger side i found it under the hood. I dont wanna cut in there. build date of 02-06 4 cyl camry
using a Im05
sNAPPER
What does this mean?
Posted By: tintman976
Date Posted: October 30, 2007 at 6:38 PM
I forgot a period sorry should read: Where is this under the dash on the passenger side. I found it under the hood. I dont wanna cut in there. build date of 02-06 4 cyl camry.
I got this POS done that is retarded to get the wires under the hood and run back in. Key and box easiest way on this turd.
Snapper
Posted By: Velocity Motors
Date Posted: October 30, 2007 at 8:26 PM
The vehicle is very easy to do. We use Fortin modules for this vehicle and all wires are easily accessible. All wires are accessible in the driver's kick panel, steering column or fuse panel.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: tintman976
Date Posted: October 30, 2007 at 9:38 PM
Really were for the imobilizer Add this info to the lists on here cause i sure could used it today
Scott
Posted By: Velocity Motors
Date Posted: October 30, 2007 at 10:03 PM
What do you need ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: extreme1
Date Posted: October 31, 2007 at 12:23 AM
the XK05-PKT2 requires you to wire at the ECM, what a pain. Idata, ADS_TB (TL) makes the connections at the steering column, much easier.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: xtremej
Date Posted: October 31, 2007 at 8:14 AM
The xk05 or imo5 sucks to install in yotas. Did an 07 camry yesterday used the keyoveride sl2 worked awesome.
Posted By: Velocity Motors
Date Posted: October 31, 2007 at 8:41 AM
I agree, the Fortin piece is much easier. The iDatalink is also a good module especially when you have all the function done throught he RS232 port.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: tintman976
Date Posted: October 31, 2007 at 9:20 PM
Nice gromet on the passenger side to go through i put the bypass under the pass dash side. I just figured the distance would be a problem. the next i could do in lot less time. Velocity where under the dash are the imoblizer wires that run from the ecu?
Snapper
Posted By: Velocity Motors
Date Posted: October 31, 2007 at 9:44 PM
Right at the ignition switch. All the wires needed are there along with the ignition wires.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|