Print Page | Close Window

2008 honda accord new body style

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98498
Printed Date: October 31, 2024 at 6:21 PM


Topic: 2008 honda accord new body style

Posted By: concepts99
Subject: 2008 honda accord new body style
Date Posted: October 31, 2007 at 4:31 PM

Has anyone worked or has info on the new accord? Particularly what is up with  the doorlocks, dei has info that the unlock motor has to be 5 wire and unlocked before the switch can receive a negative pulse. Is this how you did it? There has to be a better way?

Was the motor unlock wire INSIDE the car? I assume once cut, the 12 volt signal side is the switch side?




Replies:

Posted By: KarTuneMan
Date Posted: October 31, 2007 at 5:54 PM

The astrochart shows purple for unlock double pulse, and lock orange, AND white. All are in the door at a white 6 pin plug. A long neagtive pulse will roll up the windows

and close the sunroof. The white is "lock detection"

I have never seen the car, but this is whats listed. Looks pretty straight forward.

Nothing is wiremagic yet.





Posted By: profuse007
Date Posted: October 31, 2007 at 6:55 PM
lock and unlock motors are NOT the wires you want.

search the board. There is one person thats probably finished it.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).




Posted By: dswift
Date Posted: October 31, 2007 at 7:06 PM
use a data module for your data door locks. www.idatalink.ca . Your going to use a ads-al ca. This will do your door locks and transponder. =)

-------------
"dont ground out!"





Print Page | Close Window