2005 honda crv, remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99167
Printed Date: June 07, 2024 at 9:25 AM
Topic: 2005 honda crv, remote start
Posted By: vtech069
Subject: 2005 honda crv, remote start
Date Posted: November 19, 2007 at 8:25 PM
i am installing a remote starter on a 2005 crv. it all went well. it start up just fine. the only problemd i have is after shut down it goes in to valet mode everytime. does anyonw know why. i am using a prostart tw3400 . its a two way system.it doe not matter weather i shut it off using the transmitter or the by press the brakes it goes into valet mode. i can take if off from valter mode and restart untill the next shut down.
Replies:
Posted By: JWorm
Date Posted: November 19, 2007 at 8:29 PM
I am not familiar with that system, but is there any chance the valet button is stuck pushed in?
Posted By: vtech069
Date Posted: November 19, 2007 at 8:31 PM
tthis does not have a valet button
Posted By: moonliter
Date Posted: November 19, 2007 at 9:06 PM
First, you need to find out whether it is in valet mode or home valet mode. When you attempt to remote start the next time, watch parking lights flash rate. If it is1 long 2 short, then it is remote / ignition valet mode. If it is 2 short pause 2 short, then it is home valet mode. If it is the latter, you can disable it in the Mode 3, Function 1 Option 2. If it still acts up, I would suggest to take it back for an exchange.
Posted By: vtech069
Date Posted: November 19, 2007 at 9:08 PM
its one long and then 2 short. and i already tried to disable home valet.
Posted By: KarTuneMan
Date Posted: November 19, 2007 at 11:01 PM
Can someone explain to me  the need for 2 valet modes?
Posted By: tedmond
Date Posted: November 20, 2007 at 2:12 PM
no idea but that confused me as well.
Posted By: vtech069
Date Posted: November 20, 2007 at 9:01 PM
ok i replaced the module and it fixed the problem.
thanks once again
|