motorcycle autostart issue’s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99615
Printed Date: May 12, 2024 at 1:29 PM

Topic: motorcycle autostart issue’s

Posted By: bqe.
Subject: motorcycle autostart issue’s
Date Posted: December 03, 2007 at 7:49 AM

The bike was purchased and transported in an open trailer in 30f weather, which I believe froze out the brain.

The bike has an autostart alarm manfactured by steelmate.

When inserting the ignition key there is no power up at all. When the auto start is activated from the remote the bike powers the lights but doesnt start and then shuts down within five secs. If the hard start button is hit while the autostart is activated the bike starts up and then shuts down after the five secs.

I would appreciate any suggestions.

thanks.

Replies:

Posted By: bqe.
Date Posted: December 03, 2007 at 8:06 AM

The alarm is installed on a 05 honda 600rr.

thanks

Posted By: Twelvoltz
Date Posted: December 03, 2007 at 6:33 PM

30 degree weather should not affect a system designed for any type of vehicle application. Did you happen to get an installation manual with the SteelMate system?

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: bqe.
Date Posted: December 03, 2007 at 6:48 PM

Spent some time this afternoon and removed upper plastic to find the OEM ignition plug undone!! Nice thing to see when your about to remove the alarm.

thanks for the help!!