problem with viper 3002

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=99675
Printed Date: May 11, 2024 at 3:19 PM

Topic: problem with viper 3002

Posted By: mito57
Subject: problem with viper 3002
Date Posted: December 05, 2007 at 9:25 AM

I've installed this alarm about 1 month ago on a 2002 Dodge RAM 1500. It worked fine for a while but now it started randomly arming by itself with no apparent motive. It does not do it every time I left the vehicle. This is very problematic because two times I left the keys inside and had to call somebody to bring me other key set. Anyone has had this kind of trouble before? Any ideas what to check?

Replies:

Posted By: mobile1
Date Posted: December 05, 2007 at 9:27 AM

Sounds like you are in passive arming. Look in the install manual at the programming. Change it to active arming.

Posted By: mito57
Date Posted: December 05, 2007 at 9:30 AM

No. The alarm is set to active arming. This is a random occurrence and does no happen all the time.

Print Page | Close Window