Print Page | Close Window

power window switch kit wireing

Printed From: the12volt.com
Forum Name: Miscellaneous - Off Topic
Forum Discription: Topics that just don't fit anywhere else.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24789
Printed Date: May 28, 2024 at 7:58 PM


Topic: power window switch kit wireing

Posted By: ricmar
Subject: power window switch kit wireing
Date Posted: January 17, 2004 at 9:58 PM

I NEED THE WIREING DIRECTIONS FOR A 6 WIRE ILLUMINATED WIREING HARNESS FOR POWER WINDOW SWITCH KIT



Replies:

Posted By: auex
Date Posted: January 17, 2004 at 10:33 PM
Brand of switch would definately help on this one. Are you just replacing a switch or adding a new one?

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: ricmar
Date Posted: January 17, 2004 at 11:56 PM
all new switches and wireing.its a commando 882323 3 switch set



Posted By: ricmar
Date Posted: January 18, 2004 at 4:32 PM
can anyone help me with power window switch wireing its new switches and harness for5 wire illumanated switches.it has 3 wires comeing off the harness red,brown,small grey.the othere end for passanger side has red,green,GREEN/ black,and small grey.



Posted By: Remotep
Date Posted: January 28, 2004 at 5:28 PM
posted_image
I don't know the specific wire code for that kit ,but, the center wire on the switch is the 12v wire the wires on both sides of the power wire are both ground and the outer wires go to the window motor. I don't know if that helps you or not.

-------------
Remotep
Street Rod Enthusiast
and Installer



Posted By: ricmar
Date Posted: January 28, 2004 at 11:05 PM
yes,it helped alot.thanks


Print Page | Close Window