Print Page | Close Window

06 fusion, trunk, linear actuator

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111599
Printed Date: May 10, 2024 at 10:10 AM


Topic: 06 fusion, trunk, linear actuator

Posted By: alias20874
Subject: 06 fusion, trunk, linear actuator
Date Posted: February 14, 2009 at 10:33 PM

hello iam trying to install a linear actuator to open close trunk do i need relay if using dpdt momentary switch and if so can anyone help me on how to wire up the two relays to the actuator thanks



Replies:

Posted By: alias20874
Date Posted: February 14, 2009 at 10:38 PM
switch is dpdt momentary on-off-on can i use for up and down



Posted By: ckeeler
Date Posted: February 16, 2009 at 11:28 AM
if you are using that switch, you would only need relays if the contacts in the switch are not rated high enough for the current that will be pulling through it. if they are, your good to go with just the switch.



Posted By: alias20874
Date Posted: February 16, 2009 at 5:29 PM
the switch is rated 20a the actuator draw max5 cool thanks alot


Print Page | Close Window