how to re-wire blinker lights

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12501
Printed Date: May 15, 2024 at 3:28 AM

Topic: how to re-wire blinker lights

Posted By: pinoynapogipa
Subject: how to re-wire blinker lights
Date Posted: April 21, 2003 at 9:52 AM

TO ANYONE WHO KAN HELP,I NEED SUM HELP ON HOW TO RE-WIRE MY SIGNAL LIGHT FOR MY 96 HONDA CIVIC EX 2DR, TO MAKE IT HYPER BLINK, THANKS FOR THE 1 WHO KAN HELP.

Replies:

Posted By: Mr Thuong
Date Posted: April 28, 2003 at 4:22 AM

go buy the size of the bulbs u have but get a lower number...remember that the size has to be the same and well....put it this way, the same same exact bulbs but get a lower voltage or a lower ,odel number....

or u can switch ur signals and ur side marker...

Posted By: Thinkster
Date Posted: April 28, 2003 at 8:53 PM

Hyperblink? like blink really fast? If so, I would say the choice of the right flasher should make it blink slower or faster. Also the current draw from the bulb may change the rate as well If bulb draws more current, it might blink faster as the flashers usually work off of heat from current draw.

Print Page | Close Window