Print Page | Close Window

Question re: DRLs in Explorer

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13037
Printed Date: May 15, 2024 at 7:10 PM


Topic: Question re: DRLs in Explorer

Posted By: chamill
Subject: Question re: DRLs in Explorer
Date Posted: May 01, 2003 at 4:30 PM

I am trying to install Daytime Running Lamps in my 2003 Explorer.  I have a relay that I have to connect to the multifunction switch in the steering column and to the light switch in order for it to work with my Autolamps.  Here is my issue:

The instructions say to find the RD/YE wire at the multifunction switch and splice that into the relay.  There are three wiring harnesses at the multifunction switch, two grey and one black. The black harness has a wire that is really pink/ye, could this be the one that is being referenced? Is there any other way to tell by the number labels on the harness?

Any help would be appreciated greatly.

Thanks!



-------------
Chris



Replies:

Posted By: Thinkster
Date Posted: May 02, 2003 at 3:36 AM
Use a multimeter with a piercing tip to probe the wires in question. That's the way I do it to find or confirm a wire.




Print Page | Close Window