Need Wire size for relays
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138788
Printed Date: May 04, 2024 at 1:58 AM
Topic: Need Wire size for relays
Posted By: gksportster
Subject: Need Wire size for relays
Date Posted: April 08, 2015 at 11:47 PM
Hello I have some questions about wire sizes for relays one will be for a
electric fuel pump?
Electric door popers?
Electric windows?
Need gage size for jumpers and for the feed and to the electric components ..
Thank you sorry for all the questions just want to make sure I'm doing things right the first time . Kelly
Replies:
Posted By: howie ll
Date Posted: April 09, 2015 at 3:36 AM
Windows, allow 25 amps per pair.
Poppers, 10-15 amps each.
Fuel pump 10-15.
These sizes should also be on the instructions.
Then, Google wire gauges, that will give you the current capabilities.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: gksportster
Date Posted: April 09, 2015 at 11:15 PM
Thank you . I pulled the electric windows out of a 96 Toyota corola
The shaved door kit is from autoloc 35 to 50 lbs pull
Fuel pump is a Holley
I was told that 12 gauge wire for the shaved door kit
The electric windows in the Toyota looks like 12 gauge also
Thanks again kelly.
Posted By: howie ll
Date Posted: April 10, 2015 at 2:27 AM
Hope it helped, I asked you to Google because naturally the rest of the world doesn't use US wire gauges and I couldn't do the conversion in my head!!
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|