Print Page | Close Window

2 Relays/2switches/1 output

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141457
Printed Date: May 02, 2024 at 8:50 AM


Topic: 2 Relays/2switches/1 output

Posted By: pulsarman605
Subject: 2 Relays/2switches/1 output
Date Posted: June 30, 2016 at 3:35 PM

Sorry guys, I know this may be a silly question. I am installed a lightbar. I have two sitch inputs, the High beam and a physical switch. Can someone tell me if the diagram I have is right??

Cheersposted_image



Replies:

Posted By: i am an idiot
Date Posted: June 30, 2016 at 9:43 PM
Assuming you are using 30 and 87 of each relay and you only want the light bar on when both criteria are met, High beam on and switch on, then yes your diagram is correct.



Posted By: tonanzith
Date Posted: June 30, 2016 at 11:11 PM
posted_image

-------------
Gary Sather



Posted By: pulsarman605
Date Posted: June 30, 2016 at 11:26 PM
Yep that is correct "I am an idiot". I want High beam on and Switch on to activate the light.

Have added the numbers now.... so this should work?posted_image



Posted By: pulsarman605
Date Posted: June 30, 2016 at 11:27 PM
tonanzith. Pretty sure your way the switch trigger will turn the lights on without the other trigger. I need but relay to be activated for the light to work. So highbeam on and switch on.

Thanks though



Posted By: tonanzith
Date Posted: June 30, 2016 at 11:39 PM
No. See my above post for wiring relays. This will achieve turning on led when high beams are on or when you turn on the switch.

-------------
Gary Sather



Posted By: tonanzith
Date Posted: June 30, 2016 at 11:41 PM
Ok. So you want the led to only turn on if BOTH the high beam and switch are on at the same time? If so I musunderstood.

-------------
Gary Sather



Posted By: tonanzith
Date Posted: June 30, 2016 at 11:42 PM
If that's the case then yes your relay diagram will work. Sorry for misunderstanding.

-------------
Gary Sather




Print Page | Close Window