Backup Camera and Rearview Mirror Monitor

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142538
Printed Date: May 02, 2024 at 12:32 PM

Topic: Backup Camera and Rearview Mirror Monitor

Posted By: russbm65
Subject: Backup Camera and Rearview Mirror Monitor
Date Posted: February 04, 2017 at 11:26 AM

Hello
I am installing a Audiovox ACA800 baxkup camera and A Rostra 250-8208-TL rearview mirror monitor on a 2017 Dodge Journey. I read a volt meter to the backup lite wire it was reading at low voltage, how do I wire the relay so it get enough power to power the rearview monitor.

Replies:

Posted By: russbm65
Date Posted: February 07, 2017 at 4:01 PM

Can someone help this poor guy.

Posted By: the12volt
Date Posted: February 07, 2017 at 4:10 PM

Positive backup light wire to #85
Ground to #86
12V+ to #87
#30 to camera/monitor 12V+ input

-------------
posted_image

the12volt • Support the12volt.com

Posted By: russbm65
Date Posted: February 08, 2017 at 2:35 PM

Thanks. What about using a mini 8616 relay how is that wire up?

Posted By: the12volt
Date Posted: February 08, 2017 at 3:15 PM

Pin numbers are the same.

-------------
posted_image

the12volt • Support the12volt.com

Posted By: russbm65
Date Posted: February 09, 2017 at 4:21 PM

Thank you for your help. Appreciate it.

Print Page | Close Window