Need some help using a momentary switch
Printed From: the12volt.comForum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16027
Printed Date: May 21, 2024 at 4:59 AM
Topic: Need some help using a momentary switch
Posted By: phamine
Subject: Need some help using a momentary switch
Date Posted: July 08, 2003 at 6:09 AM
Instructions to wire msd box kill on page 6: https://www.msdignition.com/pdf/6series.pdf
I'm trying to figure out how to wire it using a momentary switch. The theft detterent on the MSD box only cuts spark when the white wire is grounded. A switch has to be activated in order to start in my diagram. The thing is it has to use a toggle switch. The white wire must stay unground in order for the car to have spark. I'm guessing I'm supposed to use another relay to get it to work, but how would I wire it so. Also, If I were to wire it to a a parking switch or any accessory as a switch, how would I wire it? The diagrams on the site are normally open configuration.
Also, what's the radio accessory wire on a 94 Honda Prelude. Is it the switch 12volts yel/red wire?
Replies:
Posted By: auex
Date Posted: July 10, 2003 at 10:12 PM
